Ürünler

Avrupa Standartlarında Yerli Üretim

Ball Valves (PN 10/16)

 

SANCAK PN 10/16 Flanged Ball Valves are members operated by bringing a ball with an opening matching with the size of the flow cross-section to vertical or parallel position to the flow axis of the fluid by using a drive shaft and turning between the seats by 90 degrees.

Description

 

  • 100% sealing is achieved with Teflon (PTFE)
    seats supported with flat springs.
  •  They can be used as two-way valves.
  •  Valve body is made of gray cast iron and the ball is made of stainless steel.
  •  Teflon that is resistant against high temperatures and many fluids allows using it numerous different applications.
  •  It should be used in fully-opened and fully-closed positions.
  •  Pressure loss is very low as the flow -section is not reduced when the valve is open.
  •  They are connected to circulation pumps without assembling an additional fitting.
  •  Low torque is required to control it.
  •  It is suitable for assembly to actuator and gearbox.

    Application areas;

  •  Hot and cold water applications,
  •  Fluids that do not show acid or alkaline properties,
  •  Low-pressure steam applications,

    Temperature;

  • 20 °C   +180 °C

 

 

 

Standard Materials

 

1 Lock C 1040
2 Thrust washer C 1040
3 Pin X20Cr13 / C 1040
4 Coupling C 1040
5 Lever C 1040
6 Nut DIN 985 / DIN 934
7 Pin Teflon PTFE
8 Body GG 25
9 Ball Teflon PTFE
10 Ball 1.4301 / C 1040
11 Intermediary Teflon PTFE
12 Cover GG 25
13 Bolt DIN 933

 

 

 

 

Bağlantı Çapı Ölçüler Nominal Basınç
DN 0d1 G H L 0D 0k 0g 0d2xn PN
40 1 1/2″ 270 135 140 150 110 84 019×4 10/16
50 2″ 270 142 150 165 125 99 019×4 10/16
65 2 1/2″ 270 152 170 185 145 118 019×4 10/16
80 3″ 300 160 180 200 160 132 019×8 10/16
100 4″ 300 174 190 220 180 156 019×8 10/16
125 5″ 440 195 325 250 210 184 019×8 10/16
150 6″ 440 210 350 285 240 211 023×8 10/16
200 8″ 600 240 400 340 295 266 023×8 10/16